EN
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
12
TRANSPORTATION
Use extra care when loading or unloading the machine into a trailer. Press the low speed drive button and carefully move the
drive levers as needed to control the speed. Always back onto the trailer when loading. When loading or unloading the mower,
do not exceed the maximum recommended operation angle of 15°. Failure to follow these instructions can result in loss of
control and result in death, serious personal injury, or property damage.
Use care when loading or unloading the mower onto a trailer. Ensure the cutting deck is raised to the highest position so that it
is not caught on the ramp. The wheels on the mower can go off the ramp or trailer, causing the mower to pivot or tip over, and
result in a crush hazard that can cause death or serious personal injury.
1. Park the mower on a level surface.
2. Raise the cutting deck to the highest position.
3. Position and secure ramp to the trailer according to manufacturer's instructions.
We recommend you use one full width loading ramp that is at least 1 ft. wider than the mower to minimize the risk of the
mower's wheels going off the side of the ramp.
4. Slowly back the mower onto the ramp and into the trailer.
5. Lower mower deck completely.
6. Set the parking brake.
7. Turn off mower and remove key.
8. Secure the mower as needed using straps or cables to prevent movement during transport.
To avoid accidental starting or movement that could result in serious personal injury, always remove the start key and set
the parking brake when transporting the mower.
13
CLEANING AND STORAGE
English
WARNING
WARNING
NOTE
WARNING
13.1
CLEAN THE MOWER DECK
32