Mitsubishi Electric TRANE CITY MULTI TPLFYP EM140 Serie Manual De Instrucciones página 8

3. Operation (For Wired Remote controller)
3.5. Airfl ow direction setting
3.5.1 Navigating through the Main menu
<Accessing the Main menu>
Main Main menu
Operation
RETURN SELECT
MENU
OFF
HOLD
<Item selection>
Main Main menu
Initial setting
RETURN SELECT
MENU
OFF
HOLD
<Exiting the Main menu screen>
Fri
83
Room
Cool Set temp. Auto
83
Mode Temp. Fan
RETURN SELECT
MENU
OFF
HOLD
<Display of unsupported functions>
Title
Not available
Unsupported function
Return: RETURN
en
RETURN SELECT
MENU
OFF
HOLD
7
Press the [MENU] button on the
Main display.
The Main menu will appear.
ON
Press [F2] to move the cursor left.
Press [F3] to move the cursor right.
Cursor
ON
Press the [RETURN] button to exit
the Main menu and return to the
Main display.
If no buttons are touched for 10
minutes, the screen will automati-
cally return to the Main display. Any
settings that have not been saved
will be lost.
ON
The message at left will appear if
the user selects a function not sup-
ported by the corresponding indoor
unit model.
ON
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
Main Main menu
Operation
ON
RETURN SELECT
MENU
OFF
HOLD
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
Main menu: RETURN
Cursor
ON
RETURN SELECT
MENU
OFF
HOLD
<Vane setting>
Fri
Swing Off Off
Vane Vent. Louver
ON
RETURN SELECT
MENU
OFF
HOLD
(Sample screen on CITY MULTI)
Fri
83
Room
Cool Set temp. Auto
83
Mode Temp. Fan
Select "Operation" from the Main
menu (refer to page 7), and press
the [SELECT/HOLD] button.
Select "Vane·Louver·Vent. (Loss-
nay)" from the Operation menu, and
press the [SELECT/HOLD] button.
Press the [F1] or [F2] button to go
through the vane setting options:
"Auto", "Step 1", "Step 2", "Step 3",
"Step 4", "Step 5" and "Swing".
Select the desired setting.
Auto
Auto Step 1 Step 2
Step 3 Step 4 Step 5
Swing
Swing
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
5", the vane will be fi xed at the se-
lected angle.
• under the vane setting icon
This icon will appear when the vane
is set to "Step 5" and the fan oper-
ates at low speed during cooling or
drying operation (depends on the
model).
The icon will go off in an hour, and
the vane setting will automatically
change.