TIASTAR MFA-5L-B1 Manual Del Usuario página 6

The most common issues experienced by Tiastar users are caused by voltage
incompatibility.
The following issues give an overview of possible errors and in structions of
how to check the unit.
Concern
Blinking green light in the back of
unit.
Fan making a loud noise.
Unit doesn't cool contents as
advertised.
Unit not cooling and lights off in
back.
Unit stopped working
Ice is building inside the unit,
around the center screws in the
back.
Water collecting at bottom of unit.
Water drip or leakage.
BASIC TROUBLESHOOTING
Possible Reason
Unit fan not rotating.
Check for fan obstruction or
failure.
Most Tiastar units cool contents
down anywhere from 18°C to 20°C
below ambient temperature.
Main power source failure.
Check that the door is clean and
free from obstruction and is closed
securely.
Water condensation. It is normal
for thermoelectric units, while in
cooling mode, to produce water
droplets that may freeze in the
back and then melt.
Water condensation is normal in
thermo-electric units. Check if
water accumulation is due to
condensation.
Check
Contact Customer Support for
assistance. Consult this Instruction
Manual or go to support@tiastar.
net for contact information.
Check the back to see if there is at
least a 2-inch clearance
around fan and vents. If issue
persists, contact Customer
Support.
Consult your unit's specific cooling
information found in this Instruc-
tion Manual. If cooling temperature
is significantly less than what is
listed for your unit, contact
Customer Support.
Check outlets first.
If unit not turning on in your
home/office: Try plugging the unit
into your car using the included
DC power cord.
If unit not turning on in your
car/motor vehicle:Try plugging the
unit into a 220-240V volt outlet in
your home/office using the
included AC power cord. If issue
persists,contact Customer
Support.
While the unit is off and at room
temperature, take a soft cloth and
gently wipe down the inside of
your unit to remove any moisture
that may accumulate. This is
recommended once or twice a
week.
If issue persists, contact Customer
Support for further assistance.
7
EN