FUXTEC FX-KS226 Manual De Instrucciones página 49

Original user manual FUXTEC FX-KS226_de_en_fr_ita_rev02
5. Explanation of other symbols on the device
PRECAUTIONS FOR CHAINSAW USERS WITH REGARD TO KICKBACK
CAUTION Kickback of the chainsaw can be caused by the tip of the chain bar
coming into contact with a solid object, or if the wood being cut compresses
and jams the chain bar during cutting.
Inlet opening for refilling "MIX
GASOLINE" 40:1
Position: Above the fuel cap
Inlet opening for refilling the
Chain Oil
Position: Above the oil cap
Notes on the switch If you turn the
switch to "O" (STOP), the engine is
switched off.
Position: Left on handle next to the
ON/OFF switch
If the choke lever (in the rear part of
the handle on the right side) is pulled
to the arrow, the start mode can be set
as follows:
Position 1 when the engine is cold.
Position 0 when the engine is warm
Position: on the right side below the
air filter
The directions indicate that the chain
brake is released (white arrow) and
activated (black arrow).
Position: Front side
Chain cover
If you replace the screw turn the
screwdriver in the direction of the
arrow to the "MAX" position, the oil
flow is stronger and if you set the
"MIN" position, the oil flow is lower.
Position: Device bottom
on the
49