Publicidad
Idiomas disponibles
Idiomas disponibles
5. Remove the old V-belt (31).
6. Insert a new V-belt.
7. Secure the drive wheel with the circ-
lip (28) and the grub screw (29) again.
Storage
• Store the appliance in a dry place well
out of reach of children.
• The device can be relocated over a
short distance with two people. Reloca-
ting the device over a longer distance
generally has to take place with a trans-
port aid.
Transport
Do not carry the bench drill
holding it on the motor unit.
Caution! Hot surface. There is a
risk of burns. Only transport the
machine when the motor unit (2)
has cooled down completely.
Troubleshooting
Problem
Device doesn't
start
Strong vibrations
Loud squeaking
noise
Possible Cause
No mains voltage
Main circuit breaker is
tripped
On switch (19) / off
switch (18) defective
Motor faulty
Motor unit (2) not fi xed
in place
Bit not centrally clamped
Damaged V-belts (31)
Drive wheel (30)
damaged
If possible, carry the bench drill together
with another person. Grip the baseplate (6)
with one hand and stabilise the machine on
the drive cover (1) with the other hand.
Waste disposal
and environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have fi nished with them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
Error correction
Check the socket, mains supply cable,
cord, mains plug; if necessary, have
them repaired by a qualifi ed electrician.
Check the main fuse
Repair by Customer Care
Repair by Customer Care
Tighten the clamping screw (10)
Check the bit in the drill chuck (21)
Check V-belts (31)
Check the drive wheel (30)
GB
MT
31
Publicidad
