Publicidad
Idiomas disponibles
Idiomas disponibles
The battery holder has an anti-drop function. When
removing the battery holder from the belt, pull up the
battery holder while pressing the unlock button.
Fig.8
► 1 . Unlock button
FUNCTIONAL
DESCRIPTION
Power button
To turn on the base layer shirt, connect all the cables,
press and hold the power button on the battery or bat-
tery holder. To turn off, press and hold the power button
on the base layer shirt.
NOTE: The power level indicator on the battery
holder is not used with the base layer shirt. Only the
power level indicator 4 will light up when using the
base layer shirt.
Fig.9
► 1 . Power button 2. Power level indicator
NOTE: The battery and the battery holder automat-
ically turns off approximately 1 hour after the base
layer shirt is turned off.
1
2
1
Temperature adjustment
CAUTION:
For continuous operation, set the
temperature setting to "low" (blue). If the base
layer shirt is overheated, the base layer shirt may
cause a malfunction and cause an injury.
There are three temperature settings (high, medium,
low). When you switch on the base layer shirt, the tem-
perature is set to "low". Each time you press the power
button, the temperature setting changes as shown in
the figure. The color of the power button shows the
current setting.
1
Fig.10
► 1 . Blue: "low" 2. Red: "high" 3. White: "medium"
Indicating the remaining battery
capacity
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Only when using the battery cartridge (with the
indicator) used with battery holder
Press the check button. The indicator lamps light up for
a few seconds.
Fig.11
► 1 . Indicator lamp 2. Check button
9 ENGLISH
2
3
1
2
1
2
Publicidad
