Home Decorators Collection HD0547G Guía De Uso Y Mantenimiento página 6

Installation (continued)
3
Installing the fixture chain
□
Choose desired hanging length for the light fixture. Suggested mounting
height over a table or island is 30 inches from the table/island top to the
bottom of the fixture.
□
Adjust the fixture chain (FF) to the desired length, removing links if
needed.
□
Connect one end of the fixture chain (FF) to the canopy chain loop
preassembled to the crossbar assembly (AA) with one quick link (DD)
and close the quick link (DD).
□
Connect the other end of the fixture chain (FF) to the fixture body (A) with
the remaining quick link (DD) and close the quick link (DD).
NOTE: You may need to use pliers (not included) to open
the links of fixture chain. If so, put a cloth over the fixture
chain to protect the finish from the pliers.
4
Pulling the supply wires
□
Pull the supply wires and ground wire up through the fixture
chain alternating links.
□
Push the ends of the supply wires and ground wire up through
the canopy chain loop and into the outlet box. The remaining
slack wire will be inserted into the outlet box in Step 6.
NOTE: To make the next step easier, cut the supply wire
and ground wire 24 inches longer than the distance from
the fixture loop to the ceiling.
Important: Please pay attention to the polarity (wire labels L
& N) when cutting wires. Wire identification will be needed
in Step 5.
6
AA
DD
FF
DD
A
Canopy chain loop
Supply wire
and ground wire