Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
Always unplug the power plug from the mains socket
before carrying out any maintenance or cleaning
operations. Let everything cool completely.
Cleaning
Please note: we recommend cleaning the product every
2 weeks.
• Unplug the power plug from the mains socket.
• Use a vacuum cleaner or an air compressor and a soft brush to
remove any dust that has accumulated on the external vents.
• Clean all the lenses with a dilute solution of glass cleaner or
isopropyl alcohol by means of a soft lint-free cloth or a special
lens cloth.
• Apply the solution to a rag or piece of cloth and slide the dirt
and grime towards the outside of the lenses.
• Gently buff the optical lenses until they are streak and lint-free.
• Never use corrosive cleaners, wire brushes, abrasive scouring
pads or metal/sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.
• Store the unit in a cool, dry place, out of the reach of children
and pets.
Maintenance
• Check everything on a regular basis and tighten the screws
mounted on the light fitting.
• Replace any corroded screws with new ones.
• Check the condition of the surface upon which the light fitting
has been installed and whether or not it is still sturdy. Make
sure that there are no signs of damage or deformation.
23
EN
Publicidad
