Zipper ZI-EWB500LI Instrucciones De Servicio página 23

11.5 Hazard warnings
Due to the structure and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not avoided,
may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which, if not
avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of the
machine. Safe working depends on you!
12 ASSEMBLY
12.1 Checking delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or missing
parts to your dealer or the shipping company immediately. Visible transport damage must also be noted
immediately on the delivery note in accordance with the provisions of the warranty, otherwise the goods
are deemed to have been properly accepted.
12.2 Assembly-steps
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
D A N G E R
WAR N I N G
C AU TI O N
N O TE
N O TE
Do not fully tighten all screws until assembly is complete.
1. Step
Assemble the left (L) and right handle (R) to the
frame (1) using one long hex screw (4), two
washers (5), one spring washer (6) and one nut (7)
each.
ASSEMBLY
23
ZI-EWB500LI