Zipper ZI-EWB500LI Instrucciones De Servicio página 26

13 OPERATION
Only operate the machine when it is in a perfect condition. Before each operation, a visual inspection of
the machine must be carried out. Safety devices and operating elements must be checked carefully.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection for
damage and if tightened properly. Replace any damaged parts before operating the machine.
13.1 Operation instructions
Unplug battery before all maintenance and settings!
• Never remove the battery while the machine is running
• In case of longer standstill, press the shut-down button
Use the electric motor only with sufficient battery charge
•
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Assemble the battery box system (1) to the
support (10) using 2 short hex screws (9), 2 spring
washers (8), 2 washers (7) and two nuts (6).
9. Step
Assemble the 3 wires (1, 2, 3) to the battery box
system.
Assembly completed
WAR N I N G
N O TE
OPERATION
26
ZI-EWB500LI