Publicidad
Idiomas disponibles
Idiomas disponibles
Technical features
Number of channels:
Working voltage:
Maximum output power @ 300VDC - 0.5 Ohm*:
Maximum output power @ 300VDC - 1 Ohm:
Input sensitivity:
Total harmonic distortion (THD):
Signal to-noise ratio:
Frequency response:
Efficiency:
Input impedance:
Protection system:
Minimum supply voltage:
Maximum supply voltage:
Idle consumption:
Maximum musical consumption @0.5 Ohm:
Maximum sinusoidal consumption @0.5 Ohm
(100Hz):
Dimensions (W x H x D):
Weight:
* For Competition: It is possible to use the product at 0.5 Ohm. Use 24 batteries (300 VDC).
For more information, contact our Technical Support support@taramps.com.br.
** NOTE: When the amplifier reaches
the temperature equivalent to 90°C (194°F) thermal protection acts, the audio is stopped and the yellow LED will flash. Only when the
amplifier back to a temperature less than 70°C (158°F) it resumes the normal operation.
After a thermal shutdown we recommend keep the amplifier on, so the cooling time is shorter, due to the ventilation of the fans.
BATTERIES
12.6Volts
Maximum Output Power*
1
176 ~ 300VDC @ 0.5 Ohm - 14 ~ 24 Batteries
80.000W RMS (For compettition)
40.000W RMS
500mV (Level 100%) @ 1 Ohm
0.3%
>95dB
10Hz ~ 15KHz (-1dB)
90% @ 1 Ohm (at Maximum Power)
20K Ohms
Short-Circuit to Output, Short on output compared
to GND, Low impedance at output, High/Low
supply voltage and Thermal protection**
150VDC
350VDC
90mA
71A
142A
239 x 73
4.30Kg / 9.46lb
14
15
21.600
26.600
x 358mm / 9.41" x 2.87" x 14.09"
16
17
31.500
36.500
09
Publicidad
