Publicidad
Idiomas disponibles
Idiomas disponibles
Functions & input
1 - INPUT UNBAL: Connect to the RCA output of the Head Unit using good quality shielded cables
to avoid noise pickup. The signals from the L and R inputs are mixed (added) internally.
2 - THRU OUT: This output can send the same input signal (INPUT) to another amplifier.
3 - LEVEL: Adjust the sensitivity of the amplifier input, in order to get better performance and
volume.
4 - MONITOR: Conexão para acessório que tem como função o monitoramento do amplificador,
onde todas as informações dos LEDs indicadores, como distorção (CLIP) e acionamento da
proteção (PROT), serão mostradas simultaneamente. (Acessório não acompanha o produto).
5 - 12.6 VDC POSITIVE TERMINAL (1.5A): Use an exclusive 12.6V battery and relay (driven by the
remote signal from Head Unit. See diagram at the page 06) .
6 - FANS: This amplifier has four internal ventilation fans. For perfect functioning, the amplifier
must be installed in a cool and aired place with at least 1" (25mm) space around the heatsink for
proper heat spreading. The usually working temperature of amplifier is 65°C.
The fans and ventilation openings are responsible for cooling the amplifier when it is in
CAUTION
use, so it cannot be obstructed.
LEDS indicators / protections
GREEN LED (HV): Indicates high voltage presence at the power terminals.
BLUE LED (ON): Indicates powered amplifier.
YELLOW LED (CLIPPING): Indicator of clipping and protections.
RED LED (PROTECTION): Indicator of protections. (See protections below).
SHORT: Red LED on.
LOW VOLTAGE (HV): Blue LED alternating with yellow.
HIGH VOLTAGE (HV): Blue LED alternating with red.
MISSING (HV): Blue LED blinking.
TEMPERATURE: Flashing yellow LED.
VOLTAGE 12V
LOW VOLTAGE 12V: If the voltage is less than 9VDC, red LED flashes 2x.
HIGH VOLTAGE 12V: If the voltage exceeds 16VDC, red LED flashes 3x.
1 2
3
0
MAX.
LEVEL
INPUT
6
4
5
12VDC
MONITOR
6
(See protections below).
04
Publicidad
