Descargar Imprimir esta página

Getac UX10 Serie Guia De Funcionamiento página 3

Ocultar thumbs Ver también para UX10 Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Getting Started
Unpacking
UX10 Tablet PC
Document(s)
AC adapter
AC power cord
Battery pack
Stylus
Tether
Installing the Micro-SIM Card
(Optional)
1. Remove one screw to detach the small metal
plate that covers the micro-SIM card socket.
2. Slide the socket cover toward the unlocked
direction (
) and open the cover.
3. Noting the orientation, put down the micro-
SIM card on the socket.
4. Close the cover and slide it back to the
locked position (
).
5. Replace the metal plate and secure it in
place with the screw previously removed.
Installing the Battery Pack
1. With the battery pack correctly oriented,
attach its connector side to the battery com-
partment at an angle (
the other side (
). The battery release latch
should automatically engage.
2. Slide the security lock to the locked position
CAUTION: Make sure the lock is correctly locked,
not revealing the underneath red part.
Connecting to AC Power and
Starting Up
You must use AC power when starting up the
Tablet PC for the very first time.
1. Connect the AC adapter as shown below.
NOTE: The power cord type varies with countries.
2. Press the power button (
3. When turning on your Tablet PC for the very
) and then press down
Battery
release latch
(
).
first time, you will be guided through a
setup process.
Tap the touchscreen with your finger to
communicate with the Tablet PC.
) to start up.
1

Publicidad

loading

Este manual también es adecuado para:

Ux10g3