Descargar Imprimir esta página

Getac UX10 Serie Guia De Funcionamiento página 8

Ocultar thumbs Ver también para UX10 Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
locations, such as near a fire, heater, in a car
in direct sunlight, etc.
Do not use unauthorized chargers.
Do not force a reverse-charge or a reverse-
connection.
Do not connect the battery with AC plug
(outlet) or car plugs.
Do not adapt the battery to unspecified
applications.
Do not short circuit the battery.
Do not drop or subject the battery to impacts.
Do not penetrate with a nail or strike with a
hammer.
Do not directly solder the battery.
Do not disassemble the battery.
Keep the battery away from an extremely low
air pressure environment as it may result in
an explosion or the leakage of flammable
liquid or gas.
Warning
Keep the battery away from infants.
Stop using the battery if there are noticeable
abnormalities such as abnormal smell, heat,
deformities, or discoloration.
Stop charging if the charging process cannot
be finished.
In case of a leaking battery, keep the battery
away from flames and do not touch it.
Pack the battery tightly during transport.
Caution
Do not use the battery where static electricity
(more than 100V) exists that might damage
the protection circuit of the battery.
When children are using the system, parents
or adults must ensure that they are using the
system and battery correctly.
Keep the battery away from flammable ma-
terials during charging and discharging.
In case lead wires or metal objects come out
from the battery, you must seal and insulate
them completely.
Caution Texts Concerning Lithium
Batteries
ATTENTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type recommended by the equip-
ment manufacturer. Discard used batteries
according to manufacturer's instructions.
6
About the AC Adapter
Use only the AC adapter supplied with your
Tablet PC. Use of another type of AC adapter
will result in malfunction and/or danger.
If a ground/earth pin attachment plug on
the AC power cord is provided, always plug
the cord into a grounded/earthed outlet. Do
not disable ground/earth pin of the
plug/cord.
Do not use the adapter in a high moisture
environment. Never touch the adapter when
your hands or feet are wet.
Allow adequate ventilation around the
adapter when using it to operate the device
or charge the battery. Do not cover the AC
adapter with paper or other objects that will
reduce cooling. Do not use the AC adapter
while it is inside a carrying case.
Connect the adapter to a proper power
source. The voltage requirements are found
on the product case and/or packaging.
Do not use the adapter if the cord becomes
damaged.
Do not attempt to service the unit. There are
no serviceable parts inside. Replace the unit
if it is damaged or exposed to excess
moisture.
Heat Related Concerns
Your device may become very warm during
normal use. It complies with the user-accessible
surface temperature limits defined by the Inter-
national Standards for Safety. Still, sustained
contact with warm surfaces for long periods of
time may cause discomfort or injury. To reduce
potential heat-related concerns, follow these
guidelines:
Keep your device and its AC adapter in a well-
ventilated area when in use or charging.
Allow for adequate air circulation under and
around the device.
Use common sense to avoid situations where
your skin is in contact with your device or its
AC adapter when it's operating or connected
to a power source. For example, don't sleep
with your device or its AC adapter, or place it
under a blanket or pillow, and avoid con-tact
between your body and your device when the
AC adapter is connected to a power source.
Take special care if you have a phys-ical
condition that affects your ability to detect
heat against the body.
If your device is used for long periods, its
surface can become very warm. While the
temperature may not feel hot to the touch,
if you maintain physical contact with the

Publicidad

loading

Este manual también es adecuado para:

Ux10g3