ATTENTION
Pay particular attention to the following matters whenever you have the unit in March:
1.
Teach your child or disabled person not to use the heater when alone.
2.
Do not leave any flammable objects near the heater.
3.
The electrical supply system should be able to withstand a minimum of 16 amps, 240V
in a heater of the MT01536 series.
INSTALLATION
THE FOLLOWING INFORMATION MUST BE TAKEN INTO ACCOUNT BEFORE
INSTALLING THE HEATER. COMPLIANCE WITH THE FOLLOWING INFORMATION
WILL HAVE IN THE CORRECT OPERATION OF THE UNIT AND WILL MINIMIZE COSTS
OF TEAM.
The heater is carefully packed and shipped in good condition.
If you find damage that may have been caused during transport, please notify the seller
immediately.
Remove plastic materials from both the inside and outside of the heater before use it. This
heater is not designed for industrial use.
The heater must be installed on flat and solid surfaces.
Leave a minimum space of 2 m. from the top of the heater to any other surface.
GROUNDING INSTRUCTIONS
The heater must be well grounded and properly polarized before its use. In the event of
a small electrical short, a proper ground connection will reduce the risk of electric shock
through an escape wire for the current electrical.
This heater is equipped with a grounding plug. The power system must be capable of
withstanding at least 16 amps, 240V in a heater from the MT01536 series and the electrical
power outlet must be installed correctly in accordance with the corresponding electrical
safety codes.
12