Specifications
Cassette player section
Tape track
Wow and flutter
Frequency response
Signal-to- noise ratio
Tuner section
FM
Tuning range
Antenna terminal
Intermediate frequency
Usable sensitivity
Selectivity
Signal-to-noise ratio
Harmonic distortion at 1 kHz
Separation
Frequency response
AM
Tuning range
Antenna terminal
Intermediate frequency
Sensitivity
Power amplifier section
Outputs
Speaker impedance
Maximum power output 35 W × 4 (at 4 ohms)
4-track 2-channel stereo
0.13 % (WRMS)
30 – 15,000 Hz
55 dB
FM tuning interval:
50 kHz/200 kHz switchable
87.5 – 108.0 MHz
(at 50 kHz step)
87.5 – 107.9 MHz
(at 200 kHz step)
External antenna connector
10.7 MHz
9 dBf
75 dB at 400 kHz
65 dB (stereo),
68 dB (mono)
0.7% (stereo),
0.4% (mono)
35 dB at 1 kHz
30 – 15,000 Hz
AM tuning interval:
9 kHz/10 kHz switchable
531 – 1,602 kHz
(at 9 kHz step)
530 – 1,710 kHz
(at 10 kHz step)
External antenna connector
10.71 MHz/450 kHz
30 µV
Speaker outputs
(sure seal connectors)
4 – 8 ohms
General
Outputs
Tone controls
Power requirements
Dimensions
Mounting dimension
Mass
Supplied accessories
Design and specifications are subject to change without
notice.
Line out rear
Power antenna relay
control lead
Power amplifier control
lead
Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
12 V DC car battery
(negative ground)
Approx. 186 × 57 × 176 mm
(w/h/d) not incl.
projecting parts and
controls
Approx. 182 × 53 × 163 mm
(w/h/d) not incl.
projecting parts and
controls
Approx. 1.2 kg
Parts for installation and
connections (1 set)
Front panel case (1)
GB
11