Tuning In By Adjusting The Frequency; Manual Tuning; Memorizing Stations Automatically - Automatic Memory Function; Memorizing Only The Desired Stations - Sony XR-1900 Manual De Instrucciones

Tuning in by Adjusting the
Frequency

— Manual Tuning

1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
SEEK
MANU
For lower
frequencies
PREVENT ACCIDENTS!
When tuning in during driving, use the
automatic tuning and the memory preset
tuning instead of the manual tuning.
Memorizing Stations
Automatically
— Automatic Memory Function
Stations with the clearest reception are
automatically searched and memorized on
each band (FM1, FM2 and AM). Up to 6
stations on each band can be stored on the
preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press the TUNER/A MEM button for more
than two seconds.
A MEM
TUNER
The unit will be start scanning the selected
band and memorize the tuned stations on
the preset number button 1 through 6
automatically.
SEEK
MANU
For higher
frequencies
Memorizing Only the
Desired Stations
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Tune in the station which you wish to
store on the preset number button.
3
Press and hold the desired preset
number button (
two seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
FM ST
Up to 6 stations on each band (FM1, FM2 and AM) can be
stored on the preset number buttons in the order of your
choice. Therefore, 12 stations can be memorized on FM.
If you try to store another station on the same preset
number button, the previously stored station will be
erased.
Receiving the Memorized
Stations
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press momentarily the preset number
button on which the desired station is
stored.
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorized.
To receive the previously memorized station, make sure
that the preset number button is pressed only momentarily.
ATA
to 6 ) for about
1
GB
7