Publicidad
Changing Units of Measurement:
Press and Hold the "
LCD displays blinks the current height 3 times,which indicates that the setting has changed.
Adjusting Anti Collision Sensor Level Adjustment:
1) Simultaneously press and hold the "
One operation can switch to one level, divided into 3 levels—A-3, A-2, A-1.
2) The display shows "
"
" means medium sensitivity; the display shows "
3) When the desk rises or falls, it will rebound immediately when encountering obstacles to prevent
damage.
Setting Upper and Lower Limits
a) Press and hold the "
display will show "top";
b) Press and hold the "
display will show "bot";
c) Press and hold the "
LED display will show "clr".
d) Entering the reset mode manually will not clear the recorded height limits.
+ 3" key for 3 seconds to toggle between Metric and Imperial.
" and "
" means the anti-collision function is on low sensitivity; the display shows
" + "4" button for 3 seconds to set the maximum height, and the LED
" + "4" button for 3 seconds to set the minimum height, and the LED
" + "4" button for 3 seconds to clear the height limit value setting, and the
" buttons for 5 seconds to switch the sensitivity.
" means high sensitivity.
17
Publicidad
