Publicidad
Idiomas disponibles
Idiomas disponibles
NAME OF PARTS
NAME OF PARTS
NAME OF PARTS
1
2
BEFORE INSTALLING THE APPLIANCE
Before connecting your fridge to the power supply, check that the voltage stated on the rating label of your appliance corresponds to the voltage
in your home. A different voltage could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn off main power to the appliance, turn it
off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a result of usage without grounding.
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to direct sunlight nor near a heat source,
e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of the cabinet.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 16°C and 38°C. If these temperatures are exceeded, i.e. colder or warmer,
the appliance will not operate correctly. If the ambient temperatures are exceeded for long periods, the temperature in the fridge will rise above
4°C and food spoilage may occur.
BEFORE PLACING FOOD IN THE FRIDGE
• Remove all packaging.
• Allow the appliance to run empty for 2 – 3 hours so the compartments can cool to the appropriate temperature.
• Clean the inside of the appliance with warm water and a little liquid detergent to remove manufacturing and transportation dust.
3
1. Glass shelf
2. Crisper drawer
3. Door balcony
4
4. Handle
5. Bottle balcony
5
Publicidad
