Dräger Oxy 3000 MK III Trainer Instrucciones De Uso página 21

5.4 Replacing the training heat
exchanger
1. Push the O-ring from the training heat exchanger onto the
breathing hose.
2. Remove the old training heat exchanger.
3. Push the breathing hose onto the new training heat
exchanger and push the O-ring onto the training heat
exchanger.
5.5 Pictograms
● When the pictograms on the tightening straps have
become worn, they can be removed and replaced with
new pictograms. Observe the preferred direction.
6 Transport
Transport the training device in the original packaging.
7 Storage
Store the training device in a cool, dry location in the original
packaging. For ambient conditions, see Technical data
8 Disposal
Dispose of the product in accordance with the applicable rules
and regulations.
Instructions for use |
Dräger Oxy 3000/6000 MK III Trainer
9 Technical data
Ambient conditions
Temperature for transport and
storage
Temperature when in use
Relative humidity
Inhalation/exhalation resistance
at 35 L/min sinus-shaped volume
flow rate
Weight
Dräger Oxy 3000 MK III Trainer
Dräger Oxy 6000 MK III Trainer
Dimensions (W x H x D)
Dräger Oxy 3000 MK III Trainer
Dräger Oxy 6000 MK III Trainer
|
Transport
-20 °C to +80 °C
-5 °C to +80 °C
up to 100 %
±4,0 mbar
2.3 kg
3.1 kg
219 mm x 190 mm x
109 mm
246 mm x 213 mm x
125 mm
21