Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
13-1. Insert the two mounting holes on the bottom of the top
cover bracket into the screws on the top corner of the tem-
pered glass cover, and then tighten the screws following the
method in step 11.
13-2. Install the remaining 3 cover brackets in succession.
Material needed
x 8
GG
14. Place the top cover over the four top cover brackets and
adjust the screw holes on the left side of the four corners
of the top cover to align with the mounting holes of the top
cover brackets. Secure the top cover and bracket with four
4.8x9.5 tapping screws.
Material needed
CC
x 4
JJ
15. Connect the hose and regulator to the cylinder.
Propane gas and cylinder are sold separately.
x 1
13
14
15
27
English
B
A
CC
infiniton.es
Publicidad
