Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Cause
The vacuum cleaner does not start:
• No supply voltage;
• Faulty ON/OFF switch;
• Faulty electric motor;
Low suction power:
• Supply voltage is too low;
• Hose, tubes and vacuuming nozzles are clogged or
blocked;
• Damaged hoses, pipes or connectors;
• Filters are damaged or dirty;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
Solution
• Check the power cord, plug, socket and circuit breaker;
• Contact technical assistance;
• Contact technical assistance;
• Use a power supply compatible with the vacuum
cleaner's technical data;
• Unclog;
• Repair or replace damaged parts;
• Clean the filters, replace if necessary;
We declare, under our sole responsibility, that the product
labelled
DRYWALL VACUUM CLEANER 25L 1200W with code
VIAG25
complies with the following standards or normative
documents:
EN 60335-2-2:2010+A11:2012+A1:2013, EN
60335-
1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019+
A15:2021, EN 62233:2008, EN IEC 55014-1:2021, EN IEC
55014-2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 61000-
3-3:2013+A1:2019+A2:2021,
2014/35/EU – Low Voltage Directive
2014/30/EU - Electromagnetic Compatibility Directive
S. João de Ver,
15th february 2023
Central Lobão S. A.
Technical manager
Hugo Santos
as defined
by:
Publicidad
