Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Make sure that the blades turn freely.
CLEANING AND MAINTENANCE:
• Before cleaning make sure that the appliance is not connected to the
electric network and prevent it from being reconnected by accident."
• Clean with a damp cloth regularly.
• The motor, propeller and all components should be inspected periodi-
cally to ensure that they are not dirty and have not suffered any dama-
ge. The frequency of inspections depends on the appliance's operating
conditions.
• Remove the dirt on the propeller and the inner parts of the casing to
avoid imbalances during operation, a decrease in aerodynamic perfor-
mance and motor damage.
DISCONNECT the appliance to do this operation in order to prevent pos-
sible accidents. The air intake ring must be pulled out. The inner parts of
the cover and the turbine should be cleaned using detergent but avoiding
spilling water on the motor. To star the extractor again, do the same ope-
ration as above but the other way round.
Note: The turbine should not be dismantled for cleaning. The cleaning
frequency varies depending on the intensity of use, nevertheless, it is re-
commended to clean it every 2 o 3 weeks.
Always demand original spare parts for repairs.
THE MANUFACTURER reserves the right to make any technological im-
provement or modification without prior notification.
Publicidad
