Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
INSTRUCTIONS FOR USE
SET-UP AND USE
1. Before starting, make sure the blender cord is unplugged and the speed dial is in
the OFF position.
2. Set the power base on a clean, dry, flat surface.
3. Attach blade assembly to the jar. Ensure silicone gasket is properly seated around
the inner edge of the collar. Turn the blade assembly until tight.
4. Place the blending jar with blade assembly onto the power base.
5. Place ingredients to be processed into blending jar. Do not fill past the MAX
marking.
IMPORTANT: Do not operate blender with an empty blending jar.
6. Plug blender into 120V 60Hz AC-only outlet.
7. The blender has a speed control dial that can turn the unit ON or OFF. The same
dial can adjust the speed settings from Minimum to Medium to Maximum Speed.
Minimum speed would be suited for light blending with liquids. Medium speed
would be suited for batters. Maximum speed would be suited for mixing liquids
with solids or much thicker liquids.
8. The blender also has three pre-set options: Pulse, Clean and Smoothie. For Pulse
blending (short bursts of high-speed blending action), press the Pulse button, the
speed will stop once you release your finger from the button. The Clean option
has dual functionality. To clean the blender after use, add some warm water with
a drop of dishwashing soap and press the Clean button to excess remove food
off of the blades and inside the blender jar. Blending jar, blades and lid can also
be washed in warm soapy water and placed in dishwasher. In addition, the Clean
option also operates as an Ice Crush function to make your favorite frozen drinks.
Note: Do not run the pulse button more than one minute at a time. Allow the unit to
rest for at least 3 minutes between maximum blending cycles.
9. When processing is complete, turn the speed dial to OFF. Unplug the cord from
the outlet and remove the blending jar from the power base.
Tip: Press the PULSE button at any time to bring the motor to max speed. If used
for 3 minutes, the appliance will switch off automatically. Wait 3 minutes
before using the appliance again.
7
3
Page 7
Publicidad
