Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
Tip:
• Press and release the PULSE button during the ICE CRUSH and SMOOTHIE
programs to stop the operation early. The appliance switches to standby mode
and indicators are flashing.
• Pressing the ICE CRUSH and SMOOTHIE buttons will not affect control knob
operation. Press and release the PULSE button or turn the control knob to OFF
position to finish the program during operation early.
• Turning the control knob during ICE CRUSH and SMOOTHIE programs will
modify the motor unit speed, following the control knob setting. Then turn the
control knob to ON position to stop operation.
• Turn the control knob to OFF position to stop any program during operation
and switch the appliance off.
PULSE BLENDING TECHNIQUE
• Use this technique when short bursts of high power are required. It is ideal for
chopping when a chunky texture is desired.
• Holding the power base with one hand, press the PULSE button and hold for a few
seconds. Release, then repeat until desired consistency is achieved.
BLENDING TIPS AND TECHNIQUES
• Always attached the blade assembly to the jar before placing on the power base.
• If ingredients being blended become stuck around the blades or on the sides of the
jar, turn the variable speed to the OFF position, lift jar off the power base and shake
to loosen food.
• When blending or chopping solid foods, such as raw vegetables, cooked meats, and
fruits, always cut pieces into sizes no larger than 1 inch before placing into jar. Blend
no more than ½ cup (125ml) of these foods at a time. This will speed up the process
and reduce wear on the blades and motor.
• The Blender is also designed for crushing ice and making frozen drinks. Most store-
bought blender drink mixes and/or other recipes will note a requirement for water
or other liquids. Ice will not crush without some form of liquid. Add ½ cup (125ml) of
water for every 1 ½ cups (375ml) of ice.
• Smaller cubes can be chopped or crushed faster than large ones.
• If too much food is blended at one time, the motor may stall. If this happens, turn
the blender off, remove a portion of the food and repeat the blending process.
• Chill the jar in the fridge before blending frozen drinks. This will help retain a cooler
temperature.
• Avoid over-blending. Usually, you will only need to blend for a few seconds, not
minutes. Over-blending may cause food to be mushy.
• Be sure the motor is completely stopped before removing the jar from the power
base.
Page 8
Publicidad
