Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OVERLOAD PROTECTION SYSTEM
• The blender is equipped with an internal non-self resetting overload protector to
protect the motor from damage under heavy loads or continuous use, the motor
may stop. If the blender suddenly stops during use, this protector may have tripped.
• Unplug the power supply and remove the jar and leave it to cool for at least 30
minutes.
• Tripping the protector indicates that the blender is being loaded too heavily, or
with excessive continuous use. Reduce the amount of ingredients used or allow
more time in between blending to prevent it from happening again, which will help
preserve the life of the motor.
• The MAX line is a good indicator to prevent overloading. Please do not blend
recipes exceeding the max line.
CLEANING AND MAINTENANCE
1. Unplug the power cord from the power outlet before cleaning.
2. Remove jar from the power base and then remove blade assembly from jar. Rinse
with warm water to remove any large food particles.
3. Fill jar half way with warm, soapy water.
4. Twist the blade assembly back on the jar. Replace jar on power base and turn the
blender on for a few seconds.
5. Remove the jar assembly from the base and rinse well. Repeat procedure as
necessary.
6. Blending jars, blade assembly and lid can also be washed in warm, soapy water
and then placed on top rack of a dishwasher. Rinse and dry thoroughly before use.
IMPORTANT: Do not use boiling water. The blade assembly bearings have been
designed with a lifetime lubricant; exposure to boiling water may
damage these bearings and shorten the life of the blender. Use of
boiling water could also cause excessive steam buildup, which may
result in personal injury.
7. The power base may be wiped with a clean, damp cloth or sponge.
CAUTION: Do not immerse the power base, cord or plug in water or any other liquid.
Do not use harsh detergents or abrasive cleansers on any part of the
blender or accessories.
WARNING: Be sure to handle the blade assembly carefully; blades are sharp.
NOTE: If you want to prepare a larger quantity, let the appliance cool down to room
temperature before you process the next batch of ingredients.
1
2
3
Page 9
Publicidad
