Mitsubishi Electric TRANE TPKA0A 1KA70 Serie Manual De Instrucciones página 7

3. Operation
Navigating through the screens
• To return to the Main screen ...... [RETURN] button
3.3. Temperature setting
<Cool, Drying, Heat, and Auto (Single set point)>
Fri
Operation mode
83
Room
Room temperature (Refer to the Installation Manual.)
Cool Set temp. Auto
83
Mode Temp. Fan
ON
RETURN SELECT
MENU
OFF
HOLD
Press the [F2] button to decrease the preset temperature, and press the
[F3] button to increase.
• Refer to the table on page 5 for the settable temperature range for dif-
ferent operation modes.
• Preset temperature range cannot be set for Fan/Ventilation operation.
• Preset temperature will be displayed either in Centigrade in 0.5- or
1-degree increments, or in Fahrenheit, depending on the indoor unit
model and the display mode setting on the remote controller.
<For IR wireless remote controller>
To decrease the room temperature:
Press button 3 to set the desired temperature.
The selected temperature is displayed.
To increase the room temperature:
Press button 3 to set the desired temperature.
The selected temperature is displayed.
en
6