Descargar Imprimir esta página

Kemper 3030N Manual Del Usuario página 5

Publicidad

REMPLACEMENT DE LA POINT. Utiliser uniquement pièces de rechanges originaux KEMPER. Vérifier au
préalable d'avoir débranché l'alimentation électrique de la prise. Desserrer la vis qui maintient la point, enlever la
point, placer la point de substitution et serrer la vis.
L'élimination de cet article est régie par la directive européenne 2012/19/UE relative aux Déchets d'Équipements Electriques et
Electroniques (DEEE). Selon cette norme, le consommateur se voit interdire d'éliminer cet article en tant que déchet urbain. Il DOIT
être éliminé par les canaux de la collecte sélective (DEEE). Ce symbole indique le devoir du consommateur d'éliminer cet article en
tant que DEEE et NON comme déchet urbain. Adressez-vous aux autorités locales ou à votre revendeur pour obtenir des conseils sur
le recyclage. Merci de recycler l'emballage dans les points de collecte prévus à cet effet. L'élimination abusive du produit par le
consommateur implique l'application des sanctions administratives prévues par la loi.
Thank you for purchasing one of our products. We recommend you carefully read this instruction manual: it contains important
information regarding safety regulations for use and maintenance of the appliance. It is also recommended to keep this document
carefully to consult in case of necessity.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
CAUTION: This tool must be placed on its stand when not in use. Keep
the tool away from flammable materials (curtains, combustible material,
furniture, etc.). To use this appliance in total safety implies observing some
basic safety measures, such as: never use the appliance with wet hands or
feet, never expose the appliance to moisture or water, never leave the
appliance exposed to atmospheric agents, never disconnect the plug by
pulling the power cord or the appliance itself. After finishing the work, turn
off the product and leave the soldering iron cool in the air; never put it under
water in order to avoid electric shocks. Do not touch metal parts of the
soldering iron (tips or resistances) when it is on, with your hands or other
parts of the body. High temperatures can cause severe burns. This tool can
set fire to different materials, make a proof on a discarded material before
use.
If the power cord is damaged, it must be replaced by the manufacturer or
the manufacturer's technical support service, or by an adequately qualified
technician so as to prevent any risks. The power cord must never be in
contact with the hot surfaces of the soldering iron. This tool is not a toy.
ATTENTION: Always place the stand on a flat and regular surface.
Before using the tool, control its integrity, if there are any defective parts, or it has other conditions, which could
negatively influence its functions and safety. Remove all the packaging material and make sure that the appliance is in
good condition. If you have any doubt, do not use the appliance and contact our After-Sales Service. Keep the packaging
material (staples, nylon bags, etc.) out of the reach of children. Before plugging the soldering iron into a socket, check
whether your voltage corresponds to the rating label of the appliance. This appliance must be connected to an approved
mains socket that complies with the safety regulations on electrical systems for civil purposes. The electrical system
must be specific for the appliance rated voltage. Do not leave the soldering iron on, if you do not use it; it causes an
early oxidation reaching over-temperatures which could compromise the duration of the resistances.
DT ISTR (3030N / 3035N / 3040N / 3050N / 3020CD / 3025CD) 10/2014 REV 5 10/2017
POUR 3020CD, 3025CD
PROTECTION DE L'ENVIRONNEMENT
SAFETY WARNINGS
GENERAL WARNINGS
5/24

Publicidad

loading

Este manual también es adecuado para:

3035n3040n3050n3020cd3025cd