Publicidad
Idiomas disponibles
Idiomas disponibles
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician shall install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc.
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
Our Pin LED Pack is an easy-to-carry bag including 6 battery-powered LED pin spots, a charger, an IRC
and colour filters. The unique magnetic base affixes to most metal surfaces. Allows wireless on/off
operation via the IRC.
comes with a rechargeable lithium battery for cable-free operation
the magnetic base affixes to most metal surfaces, no need for any extra clamps
the scissor clip with eye loop easily attaches to drop ceiling supports for quick and easy setup and
cable management
on/off button or controlled by the included IRC
different lighting looks with included warm white, red, green, blue and yellow gels
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
pan adjustment swivel base
2
safety loop
3
safety cable (not incl.)
4
scissor clip
5
magnetic base
6.
Operation
6.1
Powering the Pin Spot
The spots are powered through a single external auto-ranging power supply working with an input
voltage of 100 to 240 VAC. Output voltage is 8.4 VDC, 600 mA.
6.2
Charging
The spots allow cable-free operation through their internal rechargeable Li-ion battery. To charge the
battery, switch off the spots and simply plug in the external power supply.
The indicator light on the external power supply turns red while the battery is charging, then it turns
green when the battery is done charging.
Maximum run time at normal use is up to 6 hours, normal recharge time is 6.5 hours.
For optimal battery life, charge the battery for 24 hours prior to first use.
V. 02 – 19/01/2015
VDLLBPS6
6
mounting bracket
7
on-off switch
8
DC power input
9
tilt adjustment knob
4
©Velleman nv
Publicidad
