Publicidad
Idiomas disponibles
Idiomas disponibles
6.3
The Infrared Remote Control (IRC)
Note: Make sure to point the IRC directly at the receiver.
key
function
BLACKOUT
blackout
+/-
brightness level from 1 to 5
W
max. brightness
6.4
Changing the Gels
The spots can be fitted with gels of different colours. To apply the gels:
1.
Gently squeeze the ring in front of the lens. Remove the ring.
2.
Place the gel of the desired colour, the convex side facing the
outside.
3.
Gently squeeze the ring and place it in front of the gel. Release.
7.
Cleaning and Maintenance
All screws shall be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) shall not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
8.
Technical Specifications
power supply
power consumption
light source
colour temperature
beam angle
field angle
IP rate
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 19/01/2015
VDLLBPS6
100-240 VAC, 50/60 Hz
8.4W
1 x 3W cool white LED
7000 K
5°
12.7°
IP33
complete set
spot
complete set
spot
800 x 310 x 85 mm
195 x Ø 90 mm (bracket incl.)
3.5 kg
0.34 kg
5
©Velleman nv
Publicidad
