Publicidad
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature
following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a
safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate in an environment where the
impact drill with an increased risk of an explosion in
the vicinity of flammable liquids, gases or powders.
During operation of the impact drill can be
separated sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe
distance while working with the impact drill.
If your attention is diverted, you may lose control
over the impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be suitable for
contact. In no case is allowed to modify the structure
of the plug. When working with electrical zero, do not
use plug adapters.
Using original plugs and sockets reduces the risk
of electric shock.
2.2. Avoid touching your body to earthed bodies,
eg. pipes, heaters, stoves and refrigerators. When
your body is grounded, risk of electric shock is
greater.
Protect your impact drill from rain and moisture.
Penetration of water into the impact drill increases
the risk of electric shock.
2.3. Do not use a power cord for the purposes
for which it is not provided, eg. to bear the impact
drill for cable or removing the plug from the outlet.
Protect cords from heat, oil, contact with sharp edges
or points of mobile machines.
Damaged or twisted cables increase the risk of
electric shock.
2.4. When working with drill impact out, switch
the machine only in installations equipped with
electric switch Fi (safety shut-off switch with Residual
protection), and current leakage, which is triggered
when DTZ must be no more than 30 mA, according to
"Regulation 3 device for the electrical equipment and
power lines. Use only extension, suitable for outdoor
use. Using the extension, designed for outdoor use
reduces the risk of electric shock.
2.5. If you require the use of the impact drill
and in moist environment, plug the machine only in
installations equipped with electric switch Fi. Use of
such a safety switch utechni currents reduces the risk
of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully
and act cautiously and prudently. Do not use the
impact drill, when you are tired or under the influence
of drugs, alcohol or narcotic drugs.
A moment of distraction at work impact drill may
have the effect of extremely serious injuries.
3.2. Work with protective work clothing and always
with safety glasses.
Wearing suitable for drilling and the activities of
personal protective equipment, such as respiratory
masks, healthy, tightly closed shoes grapple with
a stable, protective helmet and silencers (hearing
protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating the impact
drill inadvertently. Before you turn the plug into the
power supply network, make sure the trigger switch
is in position "off". If, when you carry the impact drill,
keep your finger on the trigger switch, or if you submit
a voltage of the impact drill, where it is included, there
is the risk of accident.
3.4. Before you turn on the impact drill, make
sure that you have removed all of her utilities and
wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work
in a stable position of the body at any time and keep
the balance. So you can control the impact drill better
and safer if unexpected situations arise.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance from
rotating units of the impact drill. Robes, attire, long
hair can be caught and carried away by chuck.
3.7. If possible use an external aspiration system,
make sure it is switched on and functioning properly.
Use of the aspiration system reduces the risks due to
the discharge dust at work.
4. Care to drill to hit.
4.1. Do not overload the impact drill. Use only
the impact drill in accordance with its intended
purpose. Will operate better and safer when using the
appropriate impact drill manufacturer in the specified
range of load.
4.2. Do not use impact drill, whose starting switch
is damaged.
Impact drill, which can not be excluded and
included as provided by the manufacturer, is
dangerous and must be repaired.
4.3. Before you modify the settings of the impact
drill, working to replace instruments and ancillary
devices, and for a long time when you will not use the
impact drill, unplug the plug from the supply network.
This measure eliminates the danger of triggering of
the impact drill inadvertently.
11
Publicidad
