Xrocker CARBON-TEK Manual Del Usuario página 15

A GUIDE TO WALL MOUNTING
& FIXINGS
Important note:
If plastic wall plugs
are supplied with
your product:
- These are only suitable for
use in masonry walls.
- If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
- Failure of the product due to
responsibility of the installer.
Types of walls
No.1 "General Purpose" wall plug
Generally aerated blocks should
not be used to support heavy
case. For light loads, general
purpose wall plugs can be used.
No.2 "Plasterboard" wall plug
For use when attaching light loads
on to plasterboard partitions.
Care &
Maintenance
Important: When drilling into walls always check
that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used
tradesperson if you are unsure.
Hints:
1. General rule:
not sure.
2. Ensure you use the recommended drill bit to match the wall plug and
hole size.
3. Ensure you drill the hole horizontally, do not force the drill or enlarge
the hole.
4.
Ensure wall plugs are inserted beyond the thickness of the ceramic
tiles to avoid the tiles splitting or cracking.
5.
You can use one of the following types of wall plug if your walls
are made of brick, breeze block, concrete, stone or wood.
No.3 "Cavity Fixing" wall plug
For use with plasterboard partitions
or hollow wooden doors.
No.4 "Cavity Fixing-Heavy Duty"
wall plug
heavy loads such as shelving, wall
cabinets and coat racks.
and location to ensure your
safety in and around the home.
Always use a large screw and wall plug if you are
No.5 "Hammer Fixing" wall plug
For use with walls stuck with
rather than the plasterboard.
to the retaining wall.
No.6 "Shield Anchor" wall plug
Heavy load
For use with heavier loads such as
TV & HiFi speakers and satellite
dishes etc.
Fitting: From time to time check
or screws do not become loose.
EN