Bosch GWS Professional 18V-10 Manual Original página 25

plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 30).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Spindle lock button
(4) On/off switch
(GWS 18V-10)
a)
(5) Rechargeable battery
(6) Rechargeable battery release button
(7) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(GWS 18V-10 P)
(8) Standard auxiliary handle (insulated gripping sur-
face)
(GWS 18V-10)
(9) On/off switch
(GWS 18V-10 P)
(10) Unlocking lever for on/off switch
(GWS 18V-10 P)
Technical Data
Angle grinder
Article number
Rated voltage
A)B)
Rated no-load speed
Max. grinding disc dia-
meter/rubber sanding pad
diameter
Grinding spindle thread
Max. thread length of grind-
ing spindle
KickBack Control
Restart protection
Run-out brake
Weight according to EPTA-
C)
Procedure 01:2014
Recommended ambient
temperature during char-
ging
Bosch Power Tools
a)
GWS 18V-10 GWS 18V-10
3 601 JJ4 0.. 3 601 JJ4 0..
V= 18
–1
min 9000
mm 100
M 10
mm 22
●
●
●
kg 2.1–3.3 2.1–3.4
°C 0 to +35 0 to +35
(11) Extraction guard for grinding
(12) Protective guard for grinding
(13) Protective guard for cutting
(14) Cover for cutting
(15) Mounting flange with O‑ring
a)
(16) Carbide grinding head
a)
(17) Grinding disc
(18) Disc brush (dia. 22.22 mm)
a)
(19) Disc brush (M14)
a)
(20) Cutting disc
a)
(21) Diamond cutting disc
(22) Quick-clamping nut with bar
(23) Quick-clamping nut
(24) Two-pin spanner for clamping nut/round nut
(25) Handle (insulated gripping surface)
(26) Grinding spindle
a)
(27) Hand guard
a)
(28) Rubber sanding pad
a)
(29) Abrasive disc
a)
(30) Round nut
a)
(31) Cup brush
a)
(32) Conical brush
a)
(33) Diamond annular cutter
a)
(34) Open-ended spanner
(35) Extraction guard for cutting with cutting guides
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 18V-10 GWS 18V-10 P GWS 18V-10 P
3 601 JJ4 0.. 3 601 JJ4 1B.
18 18
9000 9000
115 125
M 14 M 14
22 22
● ●
● ●
● ●
2.1–3.4
0 to +35
English | 25
a)
a)
a)
a)
3 601 JJ4 1..
18 18
9000 9000
100 125
M 10 M 14
22 22
● ●
● ●
● ●
2.3–3.2 2.5–3.3
0 to +35 0 to +35
1 609 92A 8XF | (03.08.2023)