Husqvarna 967262701 Manual Del Operador página 26

MAINTENANCE
Belt Installation
1.
position, repeat Steps 4 and 5 from the above
instructions.
2. Slip the belt over the fans and route it
3. Place the belt over the right and left idler
4.
5.
belt while removing the implement used as a
brace in the plate.
6.
7.
8.
Adjusting the Mower Deck
Leveling Deck
the correct pressure. See Tire Pressures in
Maintenance section. If tires are under or over
uneven mowing result.
Four slots control the height and pitch of the
rear.
NOTE: To insure precision in the leveling
installed prior to leveling the deck.
1.
2.
bottom of the blade tip on the discharge side
measurement is the same. If adjustment
26
measurement.
3.
bolts up or down until the rear blade tips are
the front blade tips.
4.
than the front measurement. In the front,
NOTE: This will place the mower deck in a
standard measurement position. Depending on
the type of grass being mowed or environmental
get the desired cut.
Caster Wheels
must not. If wheels do not rotate freely take the
unit to the dealer for service.
Pull