Publicidad
Idiomas disponibles
Idiomas disponibles
Do not expose the power tool to rain or operate it in a wet
or damp conditions. Water entering a power tool increases
the risk of damage to the power tool and electric shock to
the user.
Hold the power tool by insulated surfaces only, which
prevent electric shock if the tool comes into contact with
hidden wiring during use.
Do
not
operate
environments, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks that can
ignite liquids, gases, or dust.
Ensure that the power tool is only used by persons familiar
with the operating instructions.
To ensure that you work with the power tool safely, you
should consider a few precautions and procedures before
start-up:
▪ Check that the whole machine and attached accessories
are fitted correctly and in good condition. Never use
damaged accessories;
▪ Under normal operation, the power tool vibrates. Check
that all bolts are properly tightened. Regular inspection
is important to ensure the safety issues and good
performances of the power tool;
▪ Check that the safety devices are in perfect condition
and function properly. Never use the power tool if the
safety devices are missing, inhibited, damaged or worn
out;
▪ If the ON/OFF switch is damaged or does not enable you
to control the operation of the power tool, it must be
repaired or replaced in order to prevent unintentional
starting of the sprayer.
Make all adjustments and work necessary for the correct
assembly of the power tool if you have any questions or
difficulties, contact your official dealer.
power
tools
in
explosive
Keep third parties away from the power tool's area of
operation. Never work while animals or people,
especially children, are in the danger zone.
Keep the work area clean, organized and well lit (250 to 300
lux), thus decreasing the risk of accidents.
Always wear personal protective equipment and clothing.
Wearing a visor or goggles, dust mask, hearing protection,
anti-slip safety shoes, long-sleeved clothing, gloves and
helmet properly reduces the risk of injury.
Clothing worn during the machine operation must be
adequate, tight and closed, for example, a work boiler suit.
Do not wear loose clothing or jewellery. Keep hair, clothing
and gloves away from rotating parts.
Operating the power tool causes high load of
vibrations which can cause damage to the circulatory
and nervous systems, especially in people with circulatory
problems. Seek medical attention if symptoms occur that
may be caused by vibrations. These symptoms, which occur
mainly in the fingers, hands or wrists, include, for example,
loss of sensation, pain, muscle weakness, discoloration of
the skin or unpleasant tingling.
When operating the machine, plan pauses and avoid
operating it for long periods of time. Permanent vibrations
are harmful to health.
Control and safety devices installed on the power tool may
not be removed or inhibited.
To avoid accidents, you should also consider the following
precautions and procedures:
▪ While using the sprayer, stand in a stable position and
always keep your balance. Hold the sprayer firmly to
ensure
continuous
unexpected situations.
operation
and
to
withstand
Publicidad
