Publicidad
Idiomas disponibles
Idiomas disponibles
While operating the sprayer you must consider some
precautions and procedures of use:
▪ Turn off the sprayer immediately if any of the following
problems arise:
- Leakage of lubricant through the ventilation slots;
- Damage on the sprayer housing;
- Damage on the potentiometer or trigger;
- Appearance of smoke or a burning smell.
Add the liquid to be sprayed slowly through the filter.
Screw the tank cap on tightly (4) and place the sprayer on
your back using the shoulder straps.
You should fit the spray nozzle (6) that best suits the task
to be performed.
Turn potentiometer (11) to turn on sprayer. Continue
turning to increase flow rate and pressure.
Point the spray nozzle at the area to be sprayed and press
the trigger (8) of the gun handle (9).
Before performing any checking, maintenance or cleaning
task, remove the battery pack from the sprayer.
The sprayer does not require any additional lubrication or
servicing. However, for a continuous and trouble-free
operation, you must perform regular cleaning and proper
maintenance tasks.
Cleaning
After each use, clean all the components of the sprayer.
Clean the sprayer with a clean, damp cloth and blow it out
with compressed air at low pressure. Careful handling
protects the power tool and extends its service life.
The power tool and its ventilation slots must be kept clean.
Clean the ventilation slots regularly or whenever they
become blocked.
Storage
When not in use, store the sprayer in a dry, clean place, free
of corrosive smoke and out of children's reach. Remove the
battery when storing the sprayer.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 967 817 569
E-mail:
support@vito-tools.com
Publicidad
