D-Link DGS-1016D Guia De Instalacion página 2

Check Your Package Contents
These are the items included with your DGS-1016D / DGS-1024D purchase:
CD-ROM
DGS-1016D /
with Product document
DGS-1024D
Notice Before Setup the DGS-1016D / DGS-1024D
The setup of the Switch can be performed using the following steps:
A. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical
Specifications for the acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct
sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation
D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.
Installation
Desktop or Shelf Installation
When installing the Switch on a
desktop or shelf, the rubber feet
included with the device must be first
attached. Attach these cushioning feet
on the bottom at each corner of the
device. Allow enough ventilation space
between the device and the objects
around it.
Quick Installation Guide
DGS-1016D / DGS-1024D
16 / 24-Port Gigabit Desktop Switch
Quick Installation
Guide
The Switch can be mounted in an EIA standard size, 19-inch
rack, which can be placed in a wiring closet with other
equipment. To install, attach the mounting brackets on the
switch's front panel (one on each side) and secure them with
the screws provided.
Then, use the screws provided with the equipment rack to
mount the Switch in the rack.
Power Cord
Rack Installation
1
Rack-mount
bracket
.