Publicidad
Idiomas disponibles
Idiomas disponibles
AC Connection
CAUTION
The inverter is engineered to be connected directly to standard electrical and electronic equipment in the manner
described above. Do not connect the power inverter to household or RV AC distribution wiring. Do not connect the
power inverter to any AC load circuit in which the Neutral conductor is connected to Ground (Earth) or to the Negative
of the DC (battery) source.
Do not connect directly to AC distribution wiring. This inverter is not grid interactive.
Wireless Remote Control
1) Make sure that the single load or the combined load
requirement of your equipment does not exceed the inverter's
output rating.（For example, the load of a 2000W inverter is that
the output of a single socket is within 2000W, or the sum of the
loads of several AC sockets is within 2000W.）
2) Switch off the inverter
3) Switch off the load
4) Plug the cord(s) from the load(s) into the AC receptacle(s) of
the inverter
5) Switch on the inverter. Wait for a few seconds
6) The LED display will be working to indicate that the inverter is
functioning
7) Switch on the load(s)
Wireless remote control is a breakthrough of JIGUUN technology, which
allows you to control from the inverter switch. Compared with no remote
control or existing wired remote control, this remote control solves many
troubles of long-distance and different space use.
1) The inverter switch must be kept off before using the remote control.
2) The remote control battery is configured to match the service life of
the
inverter, no need to replace the battery.
3) If the remote control cannot be used, please contact the JIGUUN
team in time, and we will replace it for you free of charge.
4) The remote control is an electronic product. Keep away from water,
fire and direct sunlight.
8
Publicidad
