Publicidad
Idiomas disponibles
Idiomas disponibles
Do not modify or attempt to repair the
cable.
Do not place any object on top of the
cable.
Avoid excessive bending, twisting, and
pulling of the cable.
Do not place cable near heating
equipment.
Check that the plug is clean before
plugging it in.
Be sure to push the prongs all the way in.
Regularly remove the power plug from the
outlet and clean the base of the prongs and
between the prongs. If you leave the power
plug in the outlet for a long time, dust may
collect on the base of the prongs, causing a
short and fire.
Be sure to use this product only with EPSON
products that are approved to be used with
this power supply. Do not connect it to
equipment from other manufacturers. Use this
product only for its intended application.
Improper usage may lead to equipment
damage, fire, or shock.
Do not place heavy objects on top of this
product. Never stand or lean on this product.
Equipment may fall or collapse, causing
breakage, fire, or shock.
For American Users
WARNING:
This product contains chemicals, including
lead, known to the State of California to cause
birth defects or other reproductive harm. Wash
hands after handling.
CAUTION:
Be sure to set this unit on a firm, stable,
horizontal surface. Product may break or
cause injury if it falls.
To ensure safety, please unplug this product
prior to leaving it unused for an extended
period.
DC-cable
connector
DC cable
plug
Be sure to push the end of a power cable all
the way into the AC inlet. The fitting on the
cable should make contact with the back of
the inlet.
Unpacking and Preparation
Confirm that the package includes the power
unit. If the power unit is damaged or
incomplete, contact your dealer for assistance.
Notes on Usage
Always supply power directly from a standard
power outlet.
Set the power unit so that its label side is facing
down.
Do not connect to electrical outlets close to
devices that generate voltage fluctuations or
electrical noise. In particular, stay clear of
devices that use large electric motors.
Always connect the DC cable before plugging
the power cable into the wall outlet.
When disconnecting power, always unplug the
power cable from the wall outlet before
disconnecting the DC cable.
When disconnecting the DC cable, hold it firmly
at the connector area. Do not tug on the cable
itself.
To clean the unit, wipe with a dry or slightly
moistened (and firmly wrung out) cloth. Never
clean the unit while it is plugged into the wall
outlet.
Do not clean the unit with thinner, benzine, or
alcohol.
Never attempt to stretch the cables to enable a
connection. The power cable and DC cable must
have adequate slack at all times during use.
Never allow the power unit to hang from the
power cable or DC cable.
Do not place metallic parts (such as fasteners) in
contact with the DC cable.
Do not connect the unit to a table tap or
extension cable.
power unit
AC inlet
Note:
Power cable may not
be provided in the
Publicidad
