HQ DIGICHAR110 Manual De Uso página 2

1. Parts Names
1. Charging contactors rail shifters
2. Angle adjustable charging contactors module
3. Cover, battery holder releasing knob
4. Angle stop releasing knob
5. Revive Li-ion battery / LED flash light button
6. LED lamp
7. Rear plate releasing knob
8. Li-ion battery rear plate fxing bar
9. Power input socket
10. Cover, battery holder
11. Turbo charging / Revive Ni-MH battery button
12. Power indicator
13. Li-ion Battery connected indicator
14. Ni-MH battery charging indicator
15. Li-ion battery charging indicator
16. USB output indicator
17. USB output port
18. Lithium-ion battery tray
19. Ni-MH battery tray
2. Lithium-Ion Battery Charging Mode
DO NOT connect the charger to the AC power source before (Lithium)
battery polarities are detected and the blue LED (13) is lit.
2.1 Remove the Lithium battery from its device and place it in the tray
(18) of the charger.
2.2 Check the polarity by adjusting the spring contactors with battery
charging connectors until the blue LED (13) indicator turns on.
ENGLISH
2