Publicidad
Idiomas disponibles
Idiomas disponibles
Ni-MH batteries are installed, it indicates that the batteries are
over-discharged. Please plug the AC or DC adapter into the power
input socket (9), press and hold the "Revive" button (11) on the right
side of the charger for 1 to 2 seconds until the red LED (14) turns on,
then release the button (11) to start charging.
Note: Some lithium batteries (Sony, JVC, Panasonic, etc.) have a "data
chip terminal" marked with "©". DO NOT contact these terminals with
spring contactors during operating the manual rejuvenating function to
avoid irrevocable damage (please refer to Fig. B).
8. CAUTION
This charger is only applicable to 3.6 / 3.7V or 7.2 / 7.4 V lithium-ion
batteries, AA / AAA Ni-MH rechargeable batteries.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
and other equipment if a problem should occur. Do not expose the product to
water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the
product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of
their respective holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and
electronic products should not be mixed with general household waste.
There is a separate collections system for these products.
To reduce risk of electric shock, this product should
ONLY be opened by an authorized technician when
service is required. Disconnect the product from mains
6
Fig. B
Publicidad
