Publicidad
Idiomas disponibles
Idiomas disponibles
devono essere sostituiti o lavati a seconda del tipo di filtro istallato.
Il reset della spia filtri carbone o longlife dovrà essere fatto dopo la pulizia dei filtri premendo, a
cappa spenta, contemporaneamente i tasti "PT+PL" per 4 secondi.
-----------------------------------------------------------------------------------------------------------------------------------
P0: Motor ON/OFF key ("P0" symbol lights up)
P8: key for reducing motor speed: when the hood works at first speed it turns the motor off.
P9: key for increasing motor speed: if the hood is off, it activates first speed ("P0" symbol lights up),
by
pressing it for the second time the 2nd speed is activated ("P0+P8" symbols light up),
by pressing it for the third time the 3rd speed is activated ("P0+P8+P9" symbols light up), by
pressing it for the fourth time intensive speed is activated (**) ("P0+P8" symbols light up and
"P9" symbols flashes)
PT: TIMER key ("PT" symbol flashes)
PL: LIGHT ON/OFF key ("PL" symbol lights up)
(**) Intensive speed: (if available). Intensive speed lasts for 6 minutes: once elapsed, electronics
automatically resets motor at 3rd speed
TIMER: timer performs a 15 minutes countdown and can be activated only when the motor is on.
The 15 minutes timer duration will not change even if speeds are changed during the countdown.
When the 15 minutes time elapses, the hood switches off.
Metal grease filters cleaning signal
After 30 hours of operation, "PL" key will flash every 2 seconds intermittently and grease filters need
to be washed.
The grease filters pilot lamp reset shall be done only after having cleaned the filters, by
simultaneously pressing "PT+PL" keys for 4 seconds with the hood switched off.
Charcoal or long-life filters cleaning signal
After 120 hours of operation, "PL" key will flash every 0,5 seconds intermittently and the filters need
to be replaced or washed depending on the type of filter used.
The charcoal or long-life filters pilot lamp reset shall be done only after having cleaned the filters, by
simultaneously pressing "PT+PL" keys for 4 seconds with the hood switched off.
-----------------------------------------------------------------------------------------------------------------------------------
P0: ON/OFF-Taste Motor (Symbol „P0" leuchtet)
P8: Taste zur Verringerung der Motorgeschwindigkeit, wenn sich die Haube auf Stufe 1 befindet,
wird der Motor abgeschaltet.
P9: Taste zum Erhöhen der Motordrehzahl, schaltet bei ausgeschalteter Haube die 1.
Geschwindigkeit ein (das Symbol "P0" leuchtet auf), beim zweiten Drücken die 2. Geschwindigkeit
(die Symbole "P0+P8" leuchten auf), beim dritten Drücken die 3. Geschwindigkeit (die Symbole
"P0+P8+P9" leuchten auf), beim vierten Drücken die Intensivgeschwindigkeit (**) (die Symbole
70
Publicidad
