Levolor Sheer Shadings Instalación página 6

INSTALLATION
Before You Begin
Pair Shade Before Installing
REMOTE CONTROL
Use the – and + buttons to select the
•
channel to pair to.
Press and hold the programming button
•
on the window covering for about 2
seconds until the shade jogs and/or
beeps once.
In the next 10 seconds, press and hold
•
the  on the remote until the shade jogs
twice and/or beeps three times.
USING THE INMOTION APP
If you purchased a hub, download the LEVOLOR InMotion
•
Shade can be directly paired to app, but it is recommended to pair to remote first.
•
INSIDE MOUNT
Mount the Installation Brackets
• Measure and mark 5" in from each jamb for bracket location.
— If more than two installation brackets come with your order, space additional
bracket(s) evenly between the two end brackets and mark their location.
Mount into wood whenever possible.
Jamb
5"
Space Evenly
• Center the brackets on your marks, then mark the screw hole locations.
— The minimum depth for installation brackets is 1¼".
— The minimum depth for a fully recessed mount is 3½".
6
Sheer Shadings Motorized Operating System
TOP VIEW
Limit stops should be equal
distance from the ends of headrail.
Indicator Light
Micro-USB Charging Port
app to get started.
™
WINDOW SIDE
Space Evenly
ROOM SIDE
Programming
Button
Jamb
5"
Motor
Side