Levolor Sheer Shadings Instalación página 8

INSTALLATION
5"
• Center the installation brackets or extension brackets on your marks and mark
where to drill the screw holes.
— A minimum 1
extension brackets require 1
— The tops of the installation brackets or extension brackets should be at the
desired height. The brackets should be level and aligned.
IMPORTANT: The rear of the brackets must be flush against a flat mounting
surface. Do NOT mount brackets on curved molding.
1 / "
1
8
• Drill the screw holes using a
IMPORTANT: Use drywall anchors when mounting into drywall.
• Attach the installation or extension brackets
using the screws provided.
IMPORTANT: The tops of the
installation brackets or extension
brackets must be level with
their front edges aligned.
8
Sheer Shadings Motorized Operating System
Headrail End Marks
Space Evenly
Window Opening
/ " flat vertical surface is required for the installation brackets and
1
8
/ ".
1
4
/ " drill bit.
3
32
Space Evenly
Extension
1 / "
1
4
Bracket
5"
Motor
Side