Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustment
The temperature of the outgoing water is dependent on the temperature of the incoming
water balanced with the amount of heat applied. Use extreme caution when setting the outlet
water temperature.
1.
Make sure showerhead is in the off position.
2.
Turn the water knob to max.
3.
Turn gas knob to min.
4.
Turn on gas.
5.
Turn on water.
6.
Turn showerhead on. (Or other outlet device)
7.
Wait to hear a series of audible clicks.
8.
Upon completion turn off showerhead set.
9.
Turn off water supply.
10.
Turn off gas supply.
11.
Disconnect water and gas lines.
12.
Drain plug open. See page 9 for location of pressure drain plug.
13.
Store in a safe, warm, dry place.
WARNING: Do not alter or change this water heater's original temperature sensor.
WARNING: Should overheating occur or the gas supply fail to shut off, turn off the manual
gas control valve to the appliance.
WARNING: THE PORTABLE TANKLESS
WATER HEATER IS CAPABLE OF PRODUCING
SCALDING WATER TEMPERATURES!
Pressure
Indicator
Light
Power
Indicator
Light
PLEASE NOTE: THIS MODEL IS NOT RECOMMENDED, NOR HAS IT BEEN TESTED FOR ANY PERMANENT OR INDOOR INSTALLATION. THIS
MODEL IS PART OF OUR PORTABLE, OUTDOOR SERIES AND NEEDS TO BE TAKEN DOWN AND STORED IN A WARM, DRY PLACE AFTER EVERY
USE. THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. VISIT SUPPORT.ECCOTEMP.COM FOR THE
12
Shop Online: Eccotemp.com
105
F
GAS
Gas Adjustment
LATEST VERSION OF THE MANUAL AND WARRANTY.
Support: Support.Eccotemp.com
WATER
Water Adjustment
Store Locator: Eccotemp.com/locator
Publicidad
