Publicidad
Idiomas disponibles
Idiomas disponibles
GARANT LED magnifying glass lamp
de
4.
Safety
4.1.
GROUPED SAFETY MESSAGES
bg
DANGER
Explosion hazard
da
Operating the lamp in areas subject to explosion hazards can trigger an explosion.
»
Do not use in explosion hazard areas.
en
DANGER
Electric current
Risk of fatal electric shock.
fi
»
Before starting any installation, cleaning or maintenance work, disconnect the device from the mains power supply.
»
Electrical installation, maintenance and repair may be performed only by trained specialists.
»
For use only indoors.
fr
»
If power cables or sockets are damaged, immediately disconnect the device from the power supply, do not continue to
use the device.
»
Do not drive over cables, pinch them or crush them.
it
»
Do not store liquids in the vicinity of electrically live components.
»
Do not operate the unit with wet or moist hands.
»
Check the power supply against the rated voltage and frequency shown on the nameplate, and ensure they are
hr
identical.
»
Operate the lamp using only the mains power adaptor (power supply adapter) supplied by the manufacturer.
lt
NOTICE
Uncovered magnifying glass
Fire risk when exposed to sunlight.
nl
»
When not in use, cover the magnifying glass with the magnifying glass cover.
»
Avoid exposure to direct sunlight.
no
4.2.
INTENDED USE
Use a table clamp to mount the LED magnifying glass lamp securely on the installation surface.
4.3.
REASONABLY FORESEEABLE MISUSE
pl
Not suitable for use by children.
Do not use in explosion hazard areas.
Do not expose the work lamp to intense heat, direct sunlight or naked flames.
pt
Never look directly into the light beam.
Do not operate outdoors or in rooms with high atmospheric humidity.
If damaged, do not use it.
ro
Do not make any unauthorised changes or modifications.
Do not replace the integral LED lamps.
sv
5.
Device overview
sk
1 Lamp head 2 On/Off sensor button 3 LED 4 Hard-coated plastic lens (6 dioptres) 5 Swivel joint 6 Flexible neck 7 16
mm adaptor 8 Power supply unit with EU plug part 9 US plug part
6.
Installation
sl
6.1.
MOUNTING THE LAMP TO THE TABLE CLAMP
es
Table clamp only for attachment to a sufficiently stable horizontal installation surface.
1. Attach the table clamp to the edge of the installation surface.
cs
CAUTION! Risk of injury due to the lamp falling or toppling over.CAUTION! Install the securing elements
properly.
hu
24
Publicidad
