Garant 491490 72 Manual De Instrucciones página 26

GARANT LED magnifying glass lamp
de
2. To change the dimming direction, briefly lift your finger off the On/Off sensor button.
9. Faults table
bg
i
The lamp is maintenance-free. The light source can only be replaced by the manufacturer. The mains power adaptor can
only be replaced by the manufacturer.
da
Fault
Lamp does not light up.
en
fi
fr
Lamp switches itself off spontaneously. Temperature in the lamp head too high. 1. Do not switch the lamp back on.
it
Lamp does not respond to inputs.
hr
lt
Connection cable damaged.
nl
no
pl
10. Technical data
Dimensions
pt
Designation
Lamp head
ro
Lamp support
Connecting cable
sv
Magnifying glass data
Lens diameter
sk
Lens power
Lens material
sl
LED data
Colour temperature
es Colour reproduction CRI
Colour tolerance, LED
Electrical values
cs
Voltage range
Frequency range
hu
Power consumption
26
Possible cause
Mains plug not plugged in.
Electronic components defective.
LED defective.
Mains power adaptor defective.
Software function is corrupt.
Mechanical influences on the connec-
tion cable.
Value
Ø 122 mm
Height 13 mm
Length 233 mm + 400 mm + 124 mm
2300 mm
Ø 72 mm
6 dioptres
Hard-coated plastic
4000 K
Ra > 90; R9 > 50
< 3SDCM
100 – 240 V AC
50/60 Hz
6 W
Measures
Insert the mains plug into a mains
socket.
Contact Hoffmann Group customer ser-
vice.
Contact Hoffmann Group customer ser-
vice.
Contact Hoffmann Group customer ser-
vice.
» Allow the temperature in the
lamp head to fall.
2. Switch the lamp back on.
 Withdraw the mains plug from the
power supply for a few seconds.
 If there is still no response when
switching on again, contact Hoff-
mann Group customer service.
 Immediately disconnect the dam-
aged connection cable from the
power supply.
 Do not reconnect the lamp to the
power supply.
 Contact Hoffmann Group customer
service to arrange exchange or re-
pair.