Laica KD-7920 Instrucciones Y Garantía página 18

ELECTROMAGNETIC COMPATIBILITY
Table 1 - For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture's declaration
electromagnetic emissions
The DEVICE is intended for use in the electromagnetic environment specified below.
The customer or the user of the DEVICE should assure that it is used in such an environment.
Emissions test Compliance
RF emissions
Group 1
CISPR 11
RF emissions
Class B
CISPR 11
Harmonic emissions
N/A
IEC 61000-3-2
Voltage fluctuations/
flicker emissions N/A
IEC 61000-3-3
Electromagnetic environment – guidance
The DEVICE is suitable for use in all establishments
other than domestic and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
The DEVICE is suitable for use in all establishments
domestic included and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
34
Table 2 - For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer's declaration
electromagnetic immunity
The DEVICE is intended for use in the electromagnetic environment specified below. The customer or the user of
the DEVICE should assure that it is used in such an environment.
Immunity test IEC 60601 test level
Electrostatic discharge
± 6 kV contact
(ESD)
± 8 kV air
IEC 61000-4-2
Power frequency
(50/60 Hz)
3 A/m
magnetic field
IEC 61000-4-8
Electromagnetic
Compliance level environment –
guidance
Floors should be wood,
concrete or ceramic tile.
± 6 kV contact If floors are covered with
± 8 kV air synthetic material, the
relative humidity should be
at least 30 %.
Power frequency magnetic
fields should be at levels
characteristic of a typical
3 A/m
location in a typical
commercial or hospital
environment.
35