Casals CSC1205B Instrucciones De Uso página 11

It is recommended to wear hearing protection.
The declared vibration total values and the
declared noise emission values have been
measured in accordance with EN 62841-1 test
methods and may be used for comparing one
tool with another.
The declared vibration total value and the
declared noise emission value may also be
used in a preliminary assessment of exposure.
The vibration value during actual use of the
power tool can differ from the declared total
value depending on the way in which tool is
used
It's necessary identify safety measures to
protect the operator that are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running idle
in addition to the trigger time).
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you
wish to dispose of the product once
its working life has ended, take it to
an authorised waste agent for the
selective collection of Waste from
Electric and Electronic Equipment
(WEEE).
This symbol means that product
may include a battery or batteries;
user must to remove them
before disposing of the product.
Remember that batteries must
be disposed of in duly authorised
containers. Do not dispose of them
in fire.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
To remove the batteries, once the life of the
appliance has ended, proceed as follows:
Open the bottom shell of the battery, removing
previously with the help of a screwdriver.
With the help of some clamps, remove the
battery from the inside.
Identify the battery wires and cut them (First
Red and then Black). To avoid risks of a short
circuit with a possible residual battery load,
first cut the Red wire and protect it by using
insulating tape, then proceed to cut the black
wire proceeding in the same way.
Safely remove the battery from its housing.
Dispose the batteries in appropriate containers
following your local regulations.
SYMBOLOGY AND REFERENCE
This symbol means that
user must to consult
safety warnings and
instructions thoroughly
before use.
This symbol means
that you must wear eye
protection when using
this tool.