Hoshizaki HRE-70A Manual De Instalación página 3

ENGLISH
Shakeproof Leg
Shakeproof
Fitting
Side View
Bottom View
Fig. 2
3. SET UP
IMPORTANT
1. Do not tilt the unit more than 45° when
mounting the Legs or Casters.
2. Carry the unit by holding its bottom.
1) Cut the shipping band and remove the carton.
2) Take out the accessory Legs or Casters.
3) Mount the Legs or Casters according to the
instructions printed on the package (work in a
team).
4) When mounting the Casters, lock them to prevent
the unit from sliding. Mount the Locking Swivel
Casters at the front and the Fixed Casters at the
rear.
5) Take out the accessory Drain Pan Assembly,
Guides (A) and (B), and Drain Cover.
6) Attach the Guides (A) and (B) to the mounting
holes at the bottom and rear of the refrigerator/
freezer.
7) Insert the Drain Pan Assembly along the Guides
(A) and (B). Do not damage the wiring connector
provided at the bottom for connection with the
Drain Pan Assembly.
8) Securely connect the Drain Pan Assembly
connector with the wiring connector at the bottom.
9) Attach the Drain Cover.
Connector
(Connect together)
Screw
Drain Cover
Drain Pan
Assembly
10) Before operating the unit, remove all shipping
carton, packing, tape(s) and protective plastic film
on the exterior. Be careful not to damage the
exterior panels.
11) Position the unit in a selected site.
12) Clean the interior with a soft cloth soaked in cold
or warm water containing the proper amount of
neutral cleaner and wrung dry.
13) Level the refrigerator/freezer in
both the left-to-right and the
front-to-rear directions. To
adjust the height of the unit,
turn the adjustable end of the
Legs.
14) Take out the accessory Trayslides. Always fit the
Trayslides horizontally. The Shelves should be
placed on the Trayslides.
To fit the Trayslide, (1) insert one end of the
Trayslide into the square hole in the rear Trayslide
Support, and (2) hook the Trayslide on the square
hole in the front Trayslide Support. To remove the
Trayslide, reverse the above procedure.
2
Screw
Guide (A)
Fig. 3
Longer
Shorter
Fig. 4
Guide (B)
Screw
Leg